Are your AirPods blinking red? Are you concerned? If so, you are at the proper spot. Here, we’ll offer a number of remedies to this issue.
Sometimes, due to some issue in the battery or connectivity, the user also complains about the AirPods flashing red. Here in this article, we will discuss the reasons as well as the solutions to this annoying problem.
Common Causes for Red Flashing on Your AirPods
The AirPods are entirely wireless devices as they don’t have any cables and are not interconnected. Instead, each earpiece has its Bluetooth radio that you may use to link with your phone or other Bluetooth-enabled devices. Due to wireless connectivity, the following are the possible reasons behind the AirPods blinking red.
Insufficient Charging
Being low on charge is the primary and most evident cause of your AirPods blinking red. Your AirPods have two parts that require periodic replacement. The earphones themselves are one, and the charging case is the other.
Now, if you notice a red light blinking from your AirPods charging case, it probably needs recharging. In such a situation, you must connect the AirPods case to a MagSafe wireless charger or any suitable wired charger. When your AirPods are fully charged, hopefully, they will be glowing green.
Solution 1:
Place the AirPods in the charging case, and then give them an hour or so to charge. It could be a potential answer to the problem I highlighted before. Make sure to charge them for a total of 2-3 hours in a row before usage. The business advises charging them fully before using them. You should use them up to 5% of battery after fully charging them. Another major problem experienced by consumers is a decline in battery health after partial usage and subsequent charging.
Error While Docking the Airpods in The Cover
Mismatch in storage is another frequent cause of red lights on the AirPods case. This occurs when you put the AirPods in the case when they are not in the proper alignment. Additionally, if your AirPods are switched out for someone else’s, this may also occur. It’s not uncommon for people to mistake your friend’s AirPods for yours at a party because the earbuds have a nearly identical appearance.
Solution 2:
Make sure the AirPods are properly positioned when you dock them in the charging case. After utilizing the AirPods for a year or two, the charging case’s locks may occasionally stop functioning properly. At that time, you must take special care of your AirPods while storing them in a case. They may seem fine when placed in the case, but they are not truly charging. Make sure the charging lid is lit up to symbolize ideal docking and charging.
Taking So Much Time While Firmware Update
Though Apple devices seldom have software bugs, if your AirPods are out of date, they can show up. Your AirPods’ red lights can flash as a result of this. Apple provides software updates for its iPods to aid with bug fixes and performance enhancements. Keep up with the most recent upgrades to have fewer problems with your Apple AirPods.
Solution 3:
Any device’s firmware update has the power to improve or worsen its performance and dependability. It can potentially result in the device’s total breakdown. Therefore, you must make sure that you correctly install the firmware update on the AirPods when it is issued by the Apple Company. For your convenience, we have provided the best way to update your AirPods to latest firmware version.
- If they aren’t already there, place your AirPods in their case.
- If you have a Wireless Charging Case, place your AirPods on a Qi-compatible wireless charging pad rather than using the Lightning to USB cord that is included with the charging case to attach them to a power source.
- Make sure the iOS device has an active internet connection and move the iPhone or iPad that the AirPods have been paired with close to the charging case.
Most faults and issues should be resolved once you’ve installed the most recent firmware version. The manufacturer publishes an updated firmware version that addresses all faults and issues that have been found.
How to Fix Apple Airpods Blinking Red Light Issue!
Frequently Asked Questions
What Does the Airpods’ Flashing Light Mean?
Your AirPods’ blinking lights indicate how the case is progressing. For instance, orange lights indicate a low charge whereas green lights indicate a full charge.
What’s With My Right Airpods Being So Quiet?
The speaker meshes on your right AirPods can be dirty if it sounds less clear than the left.
Why Are My Airpods Not Connecting and Glowing White?
After being reset, iPods display white flashlights, thus you must pair them again to connect.
How Are Airpods Connected to An Apple TV?
Place your AirPods in their charging case with the lid open when you’re close to the Apple TV to connect them to the device. The pairing button on the charging case should then be pressed and held until a white light flashes. Then, on your Apple TV, pick your AirPods under Settings > Remotes & Devices > Bluetooth.
Price Of Apple Airpods?
A set of AirPods with a charging case costs $159 on Apple’s website, while AirPods with a wireless charging case cost $199. The list price of an AirPods Pro set is $349.
How Are Apple Airpods Paired?
First, turn on Bluetooth on your iOS device before attempting to pair your AirPods with your iPhone or iPad. After that, insert your AirPods into the case, open the lid, and press and hold the pairing button on the charging case until a white light flashes. To finish the pairing procedure, adhere to the instructions on your iOS smartphone.
How Are Apple Airpods Recharged?
Put your AirPods in their case to charge. Charge your wireless AirPods case using a QI-approved charging mat if you have one. If you have a standard AirPods case, attach the Lightning cable to the Lightning connection on your case before inserting the other end into a USB port or charger.
How Can I Link My Apple Watch and Airpods?
Open the Control Center on your Apple Watch, hit the Airplay icon, and then choose your AirPods to pair with the device.
What Makes Apple’s Airpods Stand-Out in The Market?
They also have a MagSafe charging case, as well as other basic and advanced level features and functions, making them unique and unparalleled in the market. Apple hasn’t had the third-generation AirPods in its inventory for long, and it doesn’t introduce new AirPods variants regularly.
Who Exactly Can Enjoy the Full Features of Airpods?
Customers who own an iPhone, iPad, Mac, or Apple TV may enjoy a seamless and fully integrated pairing and device-switching experience with the AirPods that competitors cannot match, making the $179 price tag feel more expensive than some of its direct competitors.
Can we use Apple AirPods with Android devices?
Another factor contributing to AirPods’ appeal and acceptance is their gesture control. Furthermore, multi-device support, independent of the device’s operating system (OS), doubles its reliability. This means that AirPods appear to be the best earphone option for use with Apple devices in terms of functionality.
Why Airpods Don’t Have a Power Button?
The AirPods have no power button. Because they have optical sensors and accelerometers. As you put them in, they are already prepared to start working and are aware that they are in your ear. Additionally, when you remove them, the audio will immediately halt.
What Are the Possible Cons of Airpods?
Apple AirPods are a “Sensitive” item that was conceived and developed by Apple itself. Despite this, the build quality of these. The product AirPods is good enough, but still many users complain about the fragile material used to create them. That is the reason the user faces different types of problems regarding their connectivity with their smartphone, their battery timing, the audio quality, and other fundamental factors. The factors mentioned above are some of the main problems being faced by the user for a long time.